Garage Door Repair Cost in Calgary

Our published Calgary prices are $120–$180 + GST for maintenance and inspection, $180 + GST for safety sensors, $220 + GST for a standard roller replacement, $320–$360 + GST for a cable pair, and $380–$480 + GST for a standard spring pair. New opener installation ($820–$1,990) is a separate purchase, not a typical repair. The final total depends on the door and work needed; we confirm it before starting. There is no service call fee.

$380–$480 + GST for a standard pair. Includes both springs, professional installation, and a 1-year warranty. Heavy-duty .273 springs: $580 + GST. Single-spring systems: $280 + GST. 3-spring systems: $780 + GST. 4-spring systems: $1,040 + GST. Premium springs with 5-year warranty: $680 + GST. We confirm the work and total before starting.

Door weight, spring wire gauge, door height, the parts needed, and warranty terms all affect a quote. Ask whether a price covers both springs or cables, labour, GST, and any visit or after-hours charges. Our published prices include the listed parts and labour; GST is extra, and we do not add a service call fee.

A spring's cycle rating, how often the door opens, door balance, and maintenance all matter. Calgary temperature swings can add stress, but there is no reliable lifespan for every door. Ask the technician which spring specification and warranty fit your door.

Repair is almost always cheaper. Springs ($380–$480) or cables ($320–$360) cost a fraction of door replacement, which starts at $2,445 and climbs based on size, insulation, and model. We recommend replacement only when panels are severely damaged, the door is over 20 years old, or repair costs would exceed 50% of replacement cost.

No. We do not add a service call, evening, weekend, holiday, or emergency surcharge. GST is extra. We confirm the required repair and total before work begins.

On a two-spring door, both springs have usually seen the same cycles, so we normally replace the pair to keep the door balanced. The standard pair is $380–$480 + GST. A door built with one spring is a different system and has its own price in the table below.

SOMMER openers start at $820 installed for the 2060 evo+ 8-foot model. The 2060 pro+ and 2110 evo+ are $920 and $1,020. Optional SOMMER Wi-Fi adds $250 + GST. LiftMaster openers start at $880, with wall-mount jackshaft units from $1,380–$1,990. If you're installing an opener where none existed before (bare installation), add $100.

Entry-tier Ryterna 8×7 and 9×7 single-car garage doors start at $2,695 + GST. Standard 16×7 double-car Ryterna doors start at $3,195 + GST. Fully custom Ryterna doors can exceed $9,000 depending on size, insulation, finish, glazing, and design options. We quote the exact price for the model and configuration you choose.

All listed prices are plus GST (5%). The prices include parts, labour, and warranty — taxes are the only addition.

Calgary and surrounding communities: Airdrie, Cochrane, Okotoks, Chestermere, and Langdon. No travel charges within our service area.

Signs: the door won't open or feels extremely heavy when lifting manually, you heard a loud bang from the garage, there's a visible gap in one of the springs above the door. If your opener struggles to lift the door, the spring is almost always the issue.

1-year warranty on standard residential repairs — parts and labour; eligible commercial door repairs carry 3 months. For a covered residential repair, if the part we installed fails within a year, we replace it at no charge. LiftMaster openers carry the manufacturer's warranty. Premium springs and cable packages are available with a 5-year warranty.

We strongly advise against it. Torsion springs store enough energy to cause serious injury or death if they release unexpectedly. Professional technicians have specialized tools, training, and safety equipment. The $380–$480 cost for professional replacement is a fraction of an ER visit and time off work.

Replacement means we're swapping out an existing opener — wiring and mounting hardware are already in place. Bare installation means there's no existing opener, so we install electrical connections, mount new hardware, and set up everything from scratch. Bare installations add $100 to cover the additional work.

Yes. $290 + GST for customer-supplied Chamberlain or Craftsman openers, $320 for jackshaft openers. Bare installations: $390 and $420 respectively. Warranty covers our installation work only — the product warranty comes from the manufacturer.